Por favor gire su dispositivo! (Y disfrute de la mejor presentación de nuestros productos)

Todas categorías

Trituradoras de madera

— 795
Todos los artículos 23 artículos nuevos
Ordenar por:
  • desfibradora
    • Subasta: Quedan 2 días

    ZERMA ZPS1500

    Países Bajos | Almelo

    Año de hacer: 2014

    20.000 € $ 21.451 £ 17.229

    shredder; capacity 46kW; rotor speed 74 rpm; rotor size ø457x1420mm; 102 rotor knives; 5 stator knives; feeding chamber opening 1745x1920mm; with under traveling outfeed belt conveyor size approx. 5400x700mm; Goudsmit built-on magnet with outfeed belt conveyor size 650x1600mm y.o.m. 2003; with steel container; central switchbox and central control cabinet with Siemens touch screen controller and camera observation system; machine weigth approx 6270kg

  • Información para "Trituradoras de madera"

    Inscribirse y dar aviso cuando nuevos productos estén disponibles. ¡No Spam!

    ¡Sí! Se ha suscrito correctamente.

    ¡Super! Por favor verifique la bandeja de entrada de su email y confirme el registro.

  • trituradora de madera;
    • Subasta: Queda 1 día

    New Holland FR9050

    Países Bajos | Sevenum

    Año de hacer: 2012

    39.000 € $ 41.831 £ 33.597

    chopper; read Hours: 2426; Reel 32 knives; maximum authorized mass: 11500 kg. tyres : for "Goodyear" Optitrac DT830, size: 800 / 75R32; behind "Michelin" MachXbib, size: 600 / 65R28; equipped with 6-cyl. "Iveco" FPT diesel engines , 13.9 liters; central lubrication; rear view camera; climate control and air suspended seat (Attention! excl. grass pick-up)

  • trituradora de vibración JÖST, +/- 10 toneladas de arena / h
    • Precio fijo

    Jost ZUFS

    Bélgica | Amel


    Type: Zuph, serial number: 0771584 Year: 2007 Weight: 4000 kg External dimensions: 3150 mm x 2100 mm x 1800 mm vibration motor JVM TYPE JV2761150, 2 x 4 kW, 975 rev / min, 380 Hz with 2 feet 720mm (was on concrete) on silent blocks with pneumatic discharge flap

  • descortezador
    • Precio fijo

    descortezador

    Italia

    Año de hacer: 1995


    Complete Debarker Nicholson roundwood task debarking max. Ø90cm surveying chop saw logyard with 8-10 Boxing

  • GT 375
    • Precio fijo

    GT 375

    Francia

    3.000 € $ 3.217 £ 2.584

    No. 3022T Semi-Independent control Rotor flexible tube 1m - mixed Plagues Chassis resolder

  • 4 mètres
    • Precio fijo

    4 mètres

    Francia

    4.500 € $ 4.826 £ 3.876

    left and right drive housing Comer standard exchange 2 gauge wheels deportable mechanical coupling worn knives Y + pallet ventilation Rotor OK no vibration (not running fast enough)

  • EuRec Z 65 D
    • Precio fijo

    EuRec Z 65 D

    Alemania

    Año de hacer: 2000

    67.000 € $ 71.863 £ 57.718

    Shredders EuRec Z 65 D used machine Shredder EuRec Z 65 D mobile Year of construction: 2000 B.-hours counter: approx. 5,000 Cummins diesel engine: 335 HP Hook lift version Axle lift Fold-away rear discharge conveyor Field of application according to the manufacturer: Waste wood Demolition wood Branches and vines Cable drums Railway sleepers Bulky waste Lumber etc. Material L x W x H: 7.0 x 2.5 x 3.2 m Weight approx. 15 to Price Excl. VAT EXE The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

  • Astilladora LINDNER T 400 / 140-2
    • Precio fijo

    Astilladora LINDNER T 400 / 140-2

    Polonia

    Año de hacer: 1999


    Chipper LINDNER T 400 / 140-2 - The machine in stock - After the technical review - Stan bdb TECHNICAL PARAMETERS: - To edgings and waste joiner-sawmill, wood, etc. - Entry width 400 mm - Inlet height 140 mm - 2 knives - A screen with a fi fi 65 mm x 80 mmbr /> - Main engine power of 33 kW - 2 motors from 3 kW feed - 1 ROLLER pull - LOWER GEAR - 1 UPPER ROLLER pulling GEAR - FEEDER BELT SIZE: - Length 4900 mm - Width 400 mm Overall dimensions: - The length of 9000 mm - Width 2100 mm - Height 1500 mm - A mass of about 2000 kg The main advantages of the machine: * Stable construction * Austrian production LINDNER * Recommendable * For every professional

  • 500x160x2 astilladora ZENO
    • Precio fijo

    500x160x2 astilladora ZENO

    Polonia

    Año de hacer: 2009


    Chipper ZENO 500x160x2 - The machine in stock - Reconditioned - very good condition Technical parameters: - Main engine 45 kW - Stroke engines 2 x 2.2 kW - Entry width 500 mm - Inlet height 160 mm - tray measuring 300 cm - Two battle gear stretching - Two knives - Sieve 50 mm x 50 mm - rotor diameter 580 mm - The length of the rotor 510 mm - Hydraulic lifting shafts Overall dimensions machine: - Length 290 cm - Width 165 cm - Height 135 cm - Weight 3000 kg

  • Astilladora de ramas, troncos Jensen
    • Precio fijo

    Astilladora de ramas, troncos Jensen

    Polonia

    Año de hacer: 1999


    Chipper for branches, trunks Jensen chipper for branches, trunks The chipper is designed for shredding tree limbs and trunks with a diameter of 300 mm. Chips are ejected through a tube rotatable base through 360 ° in relation to the chassis of the chipper. A cutting system besteht of a disc with 2 knives (sharpened on bothsides). The chipper is equipped with a hydraulic drive system feeding rollers driven by its own hydraulic pump. Technical data: - Chipper mechanical PTO - mounted on the arms of the tractor - The inlet diameter 300 x 300 mm - Number of knives - 2 cutting - Feeding speed from 0-33 [m / min] - Chipping capacity to 8 [m3 / h] - chip widthFrom 9 to 11 mm - Method of administration - hydraulic feeder - Blade diameter of 800 mm - choke dimensions: 800 mm x 500 mm Overall dimensions machine: Length: 1600 mm width: 1800 mm Height: 3200 mm Weight: 800 kg The main advantages of the machine: - The device is fully professional - Made in Germany - The machine Recommendable - For e

  • Astilladora Bruks 200M
    • Precio fijo

    Astilladora Bruks 200M

    Polonia

    Año de hacer: 2009


    Chipper Bruks 200M Chipper disc with at electric motor Bruks 200M - The machine in stock - After the technical review - Very good condition TECHNICAL PARAMETERS: - Chipper Knife 2 - It has 8 blades casting - diametre Blade 1250 mm - Control cabinet - Two knives 40 cm x 12 cm - The two shafts Extending milled lower - One shaft Extending toothed upper Inlet dimensions: - Width 360 mm - Height 200 mm - Main Engine 37 kW - The engine of feed 1.5 kW - Feed on a chain Machine dimensions: - A length of 250 cm - Width 230 cm (370 cm with ejector) - Height 170 cm (330 cm with ejector) - Weight 2000 kg

  • Astilladora Vecoplan 35/8 / 2T
    • Precio fijo

    Astilladora Vecoplan 35/8 / 2T

    Polonia

    Año de hacer: 2009


    Chipper Vecoplan 35/8 / 2T - The machine in stock - Reconditioned - very good condition - ideal for the smoking chips Technical parameters: - Engine 22 kW - Feed motor 2 x 1,1 kW - Two knives - Width 350 mm throat - Throat height 80 mm - Year 1997 - Main engine 22 kW - Conveyor belt 4000 mm - Two shafts Extending - Sieve 20 mm x 20 mm - Length of the rotor 350 mm - rotor diameter 300 mm Overall dimensions machine: - Length 550 cm - Width 150 cm - Height 120 cm - Weight 1300 kg

  • Astilladora tipo WEIMA WL 15
    • Precio fijo

    Astilladora tipo WEIMA WL 15

    Polonia

    Año de hacer: 2004


    Chipper WEIMA type WL 15 - The machine in stock - Reconditioned - Vg condition Technical data: - Main engine power 37 kW - Engine power of the hydraulic pump 1.5 KW - Total power: 56.5 kW - Engine power of 0.75 kW żmijki - AUTO Auto Reverse - HYDRAULIC DRAWER - rotor length 1500 mm - Shaft wielonożowy clatter 34 - Dimensions of knives: 40 mm x 40 mm - Sieve fi 20 mm - Knives lace - The diameter of the nozzle suction fi 250 - rotor diameter 275 mm - Height drawers pressure 275 mm - The length of the drawer pressure of 800 mm Overall dimensions machine: - Length 270 cm - Width 230 cm - Height 200 cm - Weight 3500 kg

  • Astilladora WEIMA WL 10
    • Precio fijo

    Astilladora WEIMA WL 10

    Polonia

    Año de hacer: 2000


    Chipper WEIMA WL 10 - The machine in stock - Reconditioned - Vg condition - Well-known reputable brand - WEIMA TECHNICAL DATA: - Main engine power 37 kW - Engine power of the hydraulic pump 1.5 KW - AUTO Auto Reverse - HYDRAULIC DRAWER - Length of the rotor 1000 mm - Shaft wielonożowy clatter 23 - Dimensions of the blades: 30 mm x 30 mm - Sieve fi 20 mm - Knives lace - The diameter of the nozzle suction fi 250 - rotor diameter 275 mm - Height drawers pressure 275 mm - The length of the drawer pressure of 800 mm Overall dimensions machine: - Length 270 cm - Width 230 cm - Height 200 cm - Weight 3000 kg The chipper can process a wide range of wood waste did accumulate, eg in the joinery or carpentry workshops. mills or in the furniture industry. This list includes pallets and boxes, as well as long and short scrap wood, veneer, particle board, fiberboard, plywood and joiner, examined as extensive furniture, window frames, doors and stairs.

  • Canal de la cortadora alemán
    • Precio fijo

    Canal de la cortadora alemán

    Polonia

    Año de hacer: 1995


    Chipper chute German - The machine in stock - After the technical review - Stan BDB TECHNICAL PARAMETERS: - Main Engine 22 kW - Drawer hydraulic - New blades 26 pieces - The new screen with openings fi 30 mm - Hydraulic pump with on engine power of 1.5 kW - Extended batch measuring 250 cm x 150 cm - maximum elementsize of 90 cm x 65 cm - Control cabinet Overall dimensions machine: - Length 280 cm - The width of 220 cm - Height 235 cm - Weight 2000 kg

  • Astilladora Willibald MZA 3500 S
    • Precio fijo

    Astilladora Willibald MZA 3500 S

    Polonia

    Año de hacer: 1999


    Chipper Willibald MZA 3500 S - The machine in stock - Enhanced version - Capacity 180 m3 / h Technical data - Magnetic Separator - Main Engine 6 cylinder MAN - Engine output 420 hp - Liquid-cooled engine - Choke dimensions: - Width 125 cm - Height 60 cm - The length of filling 400 cm - 2 pinch rolls - first gear working on the hydraulics - Diameter of 50 cm - rotor diameter of 60 cm - Number of beaters 48 - Conduct chipper 4662 h - Three rows of knives against load adjustable hydraulics - Street lighting - Air brakes - Wood chipper on two axes - Hook approved

  • astilladora Diesel Jensen A 425 D
    • Precio fijo

    astilladora Diesel Jensen A 425 D

    Polonia

    Año de hacer: 2003


    Diesel chipper Jensen A 425 D - The machine in stock - After the technical review - Perfect condition TECHNICAL PARAMETERS: - Throat dimension 250 mm x 250 mm - dimension of the hopper 1000 mm x 850 mm - Two pinch rolls gears twisted - Year 1998 - Machine equipped with reverse - NEW BATTERY - auto Reverse - Cutting disc diameter of 700 mm - Four knives - The dimensions of the knife 260 mm x 60 mm - engine two-cylinder 50 HP - Control handle for adjusting the feed rate - Hitch height adjustable - Feed cardan shafts - Inlet chopper Rotated on a chassis 360 "- Outlet chopper Rotated 360" - Road lighting - hand brake - Machine equipped with ignition

  • Astilladora Żnin DWBA
    • Precio fijo

    Astilladora Żnin DWBA

    Polonia

    Año de hacer: 2009


    Chipper Żnin DWBA - The machine in stock - Reconditioned - very good condition Technical parameters: - Main engine 30 kW - Stroke engines 2 x 1.5 kW - The year of manufacture 2007 - Dimensions of the throat 400 mm x 160 mm - Two knives - Sieve 50 mm x 50 mm - Pulling the upper shaft - Two shafts Extending lower - rotor diameter 400 mm - The length of the feeder 2500 mm - Conveyor belt Overall dimensions machine: - A length of 500 cm - Width 140 cm - Height 150 cm - Weight 1500 kg

  • Astilladora Umwelttech carpintería de residuos
    • Precio fijo

    Astilladora Umwelttech carpintería de residuos

    Polonia

    Año de hacer: 2009


    Chipper waste carpentry Umwelttech - in stock - Reconditioned - The machine is well-known reputable brand TECHNICAL PARAMETERS - Opening of the feed tube: 730 mm x 800 mm - rotor diameter 265 mm - The length of the rotor 800 mm - Total power: 30 kW - Number of knives: 18 pieces - Sieve fi 12 mm - Suction nozzle diameter fi 180 mm - Height drawers pressure 140 mm - HYDRAULIC DRAWER The overall dimensions of the machine: - The length of 2500 mm - Width 1500 mm - Height 2000 mm - Weight 1500 kg

  • Astilladora Hopper para plásticos
    • Precio fijo

    Astilladora Hopper para plásticos

    Polonia

    Año de hacer: 2009


    Chipper Hopper for plastics - The machine in stock - After the technical review - Stan bdb - Engine: 2x 1.8 kW (very powerful gear) - 2 shafts with knives acting counter - Shaft length 490 mm - Shaft diameter 240 mm - speed shaft 18 RPM - Twelve blades on the shaft - Hopper dimensions: 490 mm x 570 mm Overall dimensions: - Length 145 cm - The width of 140 cm, - Height 290 cm - Weight 1000 kg The main advantages of the machine: * Stable construction * Recommendable * for every professional * Machine is not painted - original paint

  • Usada Söderhamn Eriksson 240-12 2000 Hacker y granuladores Venta Suecia
    • Precio fijo

    Soderhamn Eriksson 24012

    Suecia

    Año de hacer: 2000


    Chipper canter 240-12 - Versatile quality reducing Chipper canter 240-12 is a proven, all-round reducer unit from Söderhamn Eriksson. The 240-12 Produces first class pulp chips and cants with smooth, sawn faces of highest quality with excellent dimensional accuracy. The 240-12 chipper canter can be used as a separate machine center or be combined with circular saws or bandsaws. With a wide variety of accessories, the 240-12 can be customized for log- or cant break down, straight or sweep sawing and for production speeds up to 90 m / min. All those features in a proven machine will give you a versatile solution reducer and reward you with the highest income possible from your production. FEATURES & BENEFITS Log diameter: 90-500 mm Feed speed: 25-90 m / min Chipper disc diameter: 1,250 mm Chipper disc types: Combi Compact, Combi Spiral & CombiCut Max reduction. 2 × 150 mm Positioning: Hydraulic linear positioners Main engine: 2 × 75-2 × 90 kW Weight, approx: 5600 kg SWEDABO ref. No. - ID

  • 3,80 m
    • Precio fijo

    3,80 m

    Francia

    2.500 € $ 2.681 £ 2.153

    Flail reach large timber Rotor 1m Hammers 50% average cabin Distributor Presentation Mechanics OK

  • NEUSON-CH ECOTEC 1266 ASTILLADORA (ahora TEREX THC 465
    • Precio fijo

    Neuson-Ecotec NEUSON-ECOTEC CH 1266 CHIPPER (now TEREX THC 465

    Bélgica

    Año de hacer: 2011

    276.000 € $ 296.036 £ 237.765

    Producer/Type: Neuson Ecotec/ CH1266 Year of production: 2011 Working hours: 792 h Dimensions L x B x H: 6810x2550x3830 mm Weight: 21.000 kg Engine: Deutz/ 653PS/ 480kW Control unit: CAN-Bus Rear conveyor: 7 m max. Capacity: until 280 srm Rotor: 16 Knives Condition: very good Options included: - Fire extinguisher - Central greasing - New knives Warranty: 6 months !! Delivery time: as long as available

  • Astilladora OSKA 400
    • Precio fijo

    Astilladora OSKA 400

    Polonia

    Año de hacer: 2009


    Chipper OSKA 400 - The machine in stock - After the technical review - Stan bdb - PERFECT chips TECHNOLOGY - The width of the inlet 400 mm - Height inlet 140 mm - rotor two knife - 2 pinch rolls gears - rotor diameter 500 mm - The length of the rotor 420 mm - motor power 30 KW - The engine of feed 2 x 1.1 KW - Sieve with 50 mm x 50 mm - Conveyor belt Hay dimensions: Length 2000 mm width 400 mm Overall dimensions: - Length 420 cm - The width of 180 cm - Height 110 cm - Weight 1800 kg

  • R.18740
    • Precio fijo

    R.18740

    Francia

    Año de hacer: 1989

    750 € $ 804 £ 646

    Clapper 1.60 m No. 2096 Knives spoons PTO 540 r / min hood AR in working order

  • PA33
    • Precio fijo

    PA33

    Francia

    3.000 € $ 3.217 £ 2.584

    Bushman rotor large wooden hammer Chassis for 745 Visible to Issoudun

  • Astilladora Klockner 400x160
    • Precio fijo

    Astilladora Klockner 400x160

    Polonia

    Año de hacer: 2009


    Chipper Klockner 400x160 - The machine in stock - Reconditioned - very good condition - Ideal for chips technology Technical parameters: - Width of 400 mm - Height of the element 160 mm - Main engine 30 kW - Stroke engines 2 x 3 kW - Two hole - rotor diameter 560 mm - The length of the rotor 430 mm - Hydraulically adjustable clamps - Gear shafts Extending Overall dimensions machine: - Length 280 cm - Width 270 mm - Height 140 cm - Weight 3000 kg

  • Astilladora Vecoplan 400/160/2
    • Precio fijo

    Astilladora Vecoplan 400/160/2

    Polonia

    Año de hacer: 2009


    Chipper Vecoplan 400/160/2 - The machine in stock - After the technical review - Stan bdb - PERFECT chips TECHNOLOGY - The width of the inlet 400 mm - Height 160 mm inlet - rotor two knife - 2 pinch rolls gears - Rotor diameter 420mm - motor power 30 KW - The engine of feed 2 x 3 KW - Sieve size of 60 mm x 60 mm - Conveyor belt Hay dimensions: Length 6000 mm width 400 mm Overall dimensions: - Length 600 cm - The width of 160 cm - Height 110cm - Weight 1800 kg

  • Astilladora Weima WL 7S
    • Precio fijo

    Astilladora Weima WL 7S

    Polonia

    Año de hacer: 2007


    Chipper Weima WL 7S - The machine in stock - Reconditioned - very good condition TECHNICAL PARAMETERS: - Main engine of 18.5 kW - Hydraulic pump motor 1.5 kW - Length of the rotor 1000 mm - rotor diameter 295 mm - Height drawers pressure 295 mm - 23 knives flat - The dimensions of the knife 30 mm x 30 mm - Sieve fi 10 mm fi 20 mm - 200 mm diameter nozzle - Hydraulic drawer - control cabinet Overall dimensions machine: - Length 240 cm - Width 160 cm - Height 180 cm - Weight 1800 The chipper can process a wide range of wood waste did accumulate, eg. in the joinery or carpentry workshops, mills or in the furniture industry. This list includes pallets and boxes, as well as long and short scrap wood, veneer, particle board, fiberboard, plywood and joiner, examined as extensive furniture, window frames, doors and stairs. The main advantages of the machine: * Stable construction * German production reputable brand WEIMA * A leader among manufacturers of chippers * Recommendable * For every pr

  • Astilladora alemán de ribetes aserradero
    • Precio fijo

    Astilladora alemán de ribetes aserradero

    Polonia

    Año de hacer: 2009


    Chipper German to edgings sawmill - The machine in stock - After the technical review - ready to work TECHNICAL PARAMETERS: - The maximum width of 510 mm - The maximum height of the element 250 mm - Sieve size of 60 mm x 60 mm - Main Engine 55 kW - Two stroke engines of 2 x 2.2 kW - Daw pinch rolls gears - Translating power by belts - Hay with a length of 600 cm - The length of the rotor 530 mm - rotor width 600 mm - Height 250 mm rotor - rotor two knife Overall dimensions machine: - Length 270 cm - The width of 200 cm - Height 120 cm Weight 4000 kg

  • Astilladora Bordes aserradero Palto OS 45/20
    • Precio fijo

    Astilladora Bordes aserradero Palto OS 45/20

    Polonia

    Año de hacer: 2009


    Chipper edgings sawmill Palto OS 45/20 - The machine in stock - After the technical review - Stan bdb - Width 450 mm inlet - Height 200 mm inlet - 2 upper rollers - Tension - Gear - 2 bottom rollers - Tension - Gear - Motor power 75 KW - The engine of feed 2 x 1.1 KW - Sieve size: 18 mm fi - Shaft 3 knife - Feed speed tape set on the inverter Hay dimensions: Length 300 cm Width 45 cm Overall dimensions: - Length 5000 mm - Width 2200 mm - Height 1550 mm

  • astilladora KLOCKNER
    • Precio fijo

    astilladora KLOCKNER

    Polonia

    Año de hacer: 2009


    chipper KLOCKNER - The machine in stock - Reconditioned - Vg condition Technical data: - engine power 18 KW - ELECTRIC Autoreverse - AUTOMATIC DRAWER -HYDRAULICZNIE infeed - Number of knives: 15 pieces - Dimensions of the blades: 30 mm x 30 mm - The diameter of the nozzle suction fi 200 - Inlet dimensions: 1400 mm x 650 mm The overall dimensions of the machine: - The length of 2500 mm - Width 1900 mm - Height 2000 mm - Weight 3000 kg

  • Astilladora Bandido 90
    • Precio fijo

    Astilladora Bandido 90

    Polonia

    Año de hacer: 2009


    Brush Chipper Bandit 90 - The machine in stock - After the technical review - Very good condition Technical data - The four-cylinder internal combustion engine with a power of 75 hp - A mouth with a 400 mm x 200 mm - Two rollers Extending gear - Full documentation - Automatic overload protection work shield - Hydraulic drive the pinch rolls - Chipper disc 2 Knife - Cutting disc diameter of 800 mm - Ejector dimensions 140 mm x 230 mm - Ejector Rotated 320 degrees - Chipper drive chassis - Chipper has street lighting Overall dimensions machine: - Length 350 cm - The width of 170 cm - Height 240 cm - Weight 1800 kg

  • MATEC ECOSTAR 8 Diesel
    • Precio fijo

    Matec ECOSTAR 8 Diesel

    Suiza | Eriswil

    Año de hacer: 2016

    9.390 € $ 10.071 £ 8.089

    Wood chopper MATEC ECOSTAR 8 Diesel used machine The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Knives, spare parts, service by MATEC guaranteed CH-4952 Eriswil/Switzerland and DE-79618 Rheinfelden! Shipping costs CH / DE trucked approximately euro 280.00

Información para "Trituradoras de madera"

Inscribirse y dar aviso cuando nuevos productos estén disponibles. ¡No Spam!

¡Sí! Se ha suscrito correctamente.

¡Super! Por favor verifique la bandeja de entrada de su email y confirme el registro.

Formato de venta