Por favor gire su dispositivo! (Y disfrute de la mejor presentación de nuestros productos)

Todas categorías

Tornos

— 3.919
Todos los artículos 136 artículos nuevos
Ordenar por:
  • Torno ciclo
    • Subasta: Quedan 7 días

    Omap Alpin 250 FMS

    Suiza | Reiden


    Cycle Lathe, 17 piece tool holder (mixed; flat / prism / Drill holder, etc.), manual bezel, 3-jaw chuck diameter spiral ring 200/55029/8 cast including hard drilling and turning jaws, chuck key, chuck 0-13 mm / Mk -4, live center MK 4, center height over bed 250 mm, distance between centers 1000mm, spindle bore 77 mm, "Camlock 8" spindle taper according to DIN 55029, max. 2800 r / min., Tailstock MK-4, weighing about 2000kg originally from Italy

  • Torno
    • Subasta: Quedan 21 días

    Torno

    Suiza | Richterswil


    Lathe, center width 1000 mm, center height 180 mm, center height without bridge 280mm, passage 38 mm, main shaft MK 5, tailstock MK 3 speeds 16, speed range 45-1800 rpm, infeed (longitude) 0043-0653 mm / t, infeed (cross) 0015-0211 mm / t, thread (metric) 0.4-7 mm / t, thread (inch) 4-70 TPI, thread (diametrically) 8-144 DP, thread (module) 0.25-3.5 mm, travel top slide 95 mm, travel plan slide 180 mm, 3-jaw chuck, diameter 200 mm, 4-jaw chuck diameter 200 mm, clamping disc diameter 300 mm, motor capacity 400 V / 50 Hz / 1500 W / 2400 W dimensionally 750x1920x1500 mm, weight 710 kg

  • Torno ciclo
    • Subasta: Quedan 7 días

    Harrison Alpha 460 plus

    Suiza | Reiden

    Año de hacer: 1999


    Cycle Lathe, with "Fanuc" control, height of 230 mm, distance between centers 1500mm, swing over bed 460mm, swing over Cranking 730 mm, swing over Faceplate 270 mm spindle bore 76 mm, recording "Camlock" D1-8 "spindle speed 20-2000 rev / min., bed width 400 mm, power capacity 7,5 / 11 kW, weight about 2720 kg

  • Información para "Tornos"

    Inscribirse y dar aviso cuando nuevos productos estén disponibles. ¡No Spam!

    ¡Sí! Se ha suscrito correctamente.

    ¡Super! Por favor verifique la bandeja de entrada de su email y confirme el registro.

  • Mazak Quick Turn Nexus 250 Tornos CNC
    • Precio fijo

    MAZAK QUICK NEXUS TURN 250

    Polonia

    21.300 € $ 22.846 £ 18.349

    Próximamente

  • Torno ciclo
    • Subasta: Quedan 7 días

    Harrison Alpha 330 plus

    Suiza | Reiden

    Año de hacer: 1997


    Cycle Lathe, with "Fanuc" control, with three-jaw chuck, "Böhni" steel holder with several holders, center height 167 mm, distance between centers 1000mm, turning diameter 330 mm, turning diameter over slide 210 mm spindle bore 42 mm, recording "Camlock" D1-4 "spindle speed 3500 rev / min., weight 1200 kg L x W x H 2040 x 1200 x 1550 mm, manuals available

  • LZ Torno Tigre
    • Subasta: Quedan 64 días

    LZ Torno Tigre

    1.200 € $ 1.287 £ 1.033

    Maschinenabmaße total 2,300 x 1,000 x 1,500 mm, with top-mounted 4-jaw chuck and additionally it standing 3-jaw chuck, tailstock and tool rest, height above the bed 280 mm, max. Spindle length 1,100 mm, rear port D 70 mm, adjustable spindle speed 18-1000 rpm, adjustable automatic feed, Remarks at feed rates Walter Kranz

  • STANKO TORNO
    • Precio fijo

    STANKO 16B 16PG


    Specification Description SWING 8" TO CENTER 43" ELECTRICS 600 V 3 PHASE 60 Hz BORE 1 7/8"TAILSTOCK & CROSSLIDE FAGAR NVK 20 DIGITAL READ OUT

  • FEELER TORNO

    Specification Description SWING OVER BED 9" BED LENGTH 36" SPINDLE SPEEDS (VARIABLE) 230 TO 3500 RPM MAIN DRIVE MOTOR (2 SPEED) 2 HP A.C. APPROX. MACHINE WEIGHT 1,000 LBS

  • Tsugami BO18 - 10.000 RPM, 1998
    • Precio fijo

    Tsugami BO18 - 10.000 RPM, 1998

    Estados Unidos


    Max. Turning Diameter 0.71" | Spindle Speed 10,000 RPM | Spindle Motor 5 HP | Sub-Spindle Speed 5,000 RPM | Sub-Spindle Motor 4 HP | Fixed Guide Bushing 6.7" | Rotary Guide Bushing 3.1" | Chuck Model 1.77" | Drive Guide Bushing 3.15" | Z Main Headstock In and Out 6.7" | T1 OD Tool Slide Up and Down 3.94" | X OD Tool Slide Right and Left 1.26” | (7) OD, (3) ID | Fanuc Control | IMECA Mini Boss 325 Barfeeder | 5-Axis |

  • Spinner TC600-65-MCY
    • Precio fijo

    Spinner TC600-65-MCY

    Año de hacer: 2013


    Rotary spindle V3 to 4000 1 / min / 66 mm, power / torque at S6 / 60%. 24 kW / 228 Nm spindle nose DIN 55026-A8, hole clamping cylinder 66 mm C-axis for spindle including software option "Transmit" to the end face machining and " Cylindrical "for surface machining switching turret 16x for tool holder DIN 69880-30 mm, radially - SPI clutch 16 driven tool stations CNC tailstock for CNC slides in the program moved with MK4 chip conveyor glass scale in the X-axis clamping force control via differential pressure for main spindle, for low clamping forces high-pressure pump 15 bar parts catcher 840D-SL software package "turning with ShopTurn" 840D-SL option: residual material detection and machining for contour pockets and cutting

  • Mazak Integrex E-1550V - 2013
    • Precio fijo

    Mazak Integrex

    Estados Unidos


    Max. Turning Diameter 78.74" | Max. Turning Length 54.92" | Max. Swing 80" | Tool Magazine Capacity 80 ATC | X-Axis Travel 73.82" | Y-Axis Travel 61.02" | Z-Axis Travel 52.95" | B-Axis Travel 150 Degrees | C-Axis Travel 360 Degrees | Mill-Spindle Synchronous Tapping | Tool Radius Compensation | 3-D Coordinate Conversion | Through Mill Spindle Coolant (High Pressure Coolant) | Absolute Positioning System | Double Internal Conveyer Side Disposal |

  • Topper TNL-100A - 2 "Bar, tirada de collar, 4.500 RPM de 2002
    • Precio fijo

    Topper TNL-100A - 2 "Bar, tirada de collar, 4.500 RPM de 2002

    Estados Unidos


    Bar Capacity 2" | Swing Over Saddle 14.60" | Max Turning Diameter 10.40" | Max Turning Length 14.80" | Spindle Speed 4,500 RPM | Spindle Motor 20 HP | Tool Positions 12 Fanuc Oi-T CNC Control | Collet Nose | Parts Catcher with Belt | Chip Conveyor | Tool Presetter | Topper 4' Bar Feeder |

  • Monforts KNC5
    • Precio fijo

    Monforts KNC5

    Año de hacer: 1996

    14.900 € $ 15.981 £ 12.835

    Turning diameter over slide 500 mm turning length 1000 mm spindle bore 71mm Spindle motor 16,5kW 3-2800 U / min 1681 Nm

  • Mazak QT40 - 2.75 "Bar, 12" Chuck, 20.8 "Swing 2006
    • Precio fijo

    Mazak QT40 - 2.75 "Bar, 12" Chuck, 20.8 "Swing 2006

    Estados Unidos


    Bar Capacity 2.75" | Chuck Size 12" | Number of Axis 2 | Max. Swing 20.8" | Max. Swing on Carriage 15.75" | Max. Machining Diameter 12.6" | Max. Turning Length 60" | Spindle Speeds 3,000 RPM | Main Motor 40 HP | X Axis 11.02" | Z Axis 60.51" | Approx. Weight 12,600 lbs. | Mazatrol 640T CNC Control | Tailstock

  • DOOSAN - PUMA 300 MC
    • Precio fijo

    Doosan PUMA

    España | Barcelona


    DOOSAN Lathe Lathe CNC with live tool. Model PUMA 300 MC Distance between centers 690 mm. Máx turning length 565 mm. Max turning Ø 355 mm Travels: X 250 (72+178)mm Z 680 mm Axis C 360° (0,001°) Chuck Ø 305 mm Ø inside the front bearing 160 mm Ø Interior clamping bar 103 mm Tailstock quill travel 100 mm Rapid avances X 20 m/mm, Z 24 m/mm, C 200 g/min Max spindle speed 2800 r.p.m. Motor power 22 kW Machine ON: 36072 h. Machine working: 8609 h. Year 2006 Equipped with: •CNC FANUC 21iTB •Turret of 12 positions •Chip conveyor

  • Torno CNC - Tipo de cama inclinada Okuma LT15M
    • Precio fijo

    Okuma LT15M

    Año de hacer: 1999


    Gebr. CNC slant bed lathe OKUMA LT15M Year 1999 Control: Okuma OSP 7000 L Number of controlled axes: 8 Diameter: 210 mm Swing over bed: 550 mm Swing over carriage: 150 mm turning length: 900 mm Distance between centers: Max. 1174 mm travel x1: 230 mm travel z 1: 460 mm travel x2: 230 mm travel z 2: 900 mm spindle bore: 62 mm Spindle speeds: 45 - 4500 r / min feed: 0.001 to 1000.00 mm / rev Rapid - longitudinal / plan: size 24/20 m / min C-axis: 2 x turrets: 2 x 12 Pos number of driven tools: 2 x 12 Pos diameter of the tool holder in the turret: 40 mm speed of driven tools:.. 100-4500 mm / rev spindle motor: 15 kW weight of the machine ca .: 8,2 t Accessories: 2 St. hydr. 3-jaw chuck 200 mmø, div. Tool holder for Revolver (also for driven tools), chip conveyor, coolant system

  • Doosan MX1600ST - 2 "de bar, 6" Chuck, 6.000 RPM 2012
    • Precio fijo

    Doosan MX1600ST - 2 "de bar, 6" Chuck, 6.000 RPM 2012

    Estados Unidos


    Bar Capacity 2" | Chuck Size 6" | Max. Turning Diameter 13" | Max. Turning Length 27.6" | Spindle Speed (Left/Right) 6,000 RPM | Spindle Motor (Left/Right) 20 HP | Milling Spindle Speed 12,000 RPM | Number of Tools 40 ATC | Lower Turret 8 (Only Turning)/ 16 (Milling) | X-Axis 17.7" | Z-Axis 28.9" | Y-Axis 6.7" | B-Axis 240 Deg. | Fanuc Series 31i-Model B | Live Tooling | Turbo Chip Conveyor | Renishaw Probe for B-Axis | 145 PSI for Lower Turret | Chip Blaster 1000 PSI for Upper Turret | Transformer

  • SMTCL Torno - 2007
    • Precio fijo

    SMTCL Torno - 2007

    Estados Unidos


    Max. Diameter Over Bed 49" | Max. Diameter Over Slide 32.25" | O.A Length 195" | Chuck Diameter 32" | Max. Steadyrest Diameter 24" | Turret Stations 8 | Machine Weight 50,000 lbs. | Fanuc OITC Control | Bison All Steel 32" Dia. 3-Jaw Chuck | 3 Roller Steadyrests | Sauter 8 Station Vert. Turret | Ritten MT6 Live Center | Two Renishaw Probes (1 in Process Work Probe, 1 Tool Probe, both run by Machro Programs) | Chip Conveyor | 2 Chip Augers | Full 78" Inside Cabinet Ht. with All 6 Doors Closed, (All 6 Doors Telescope to the left end Flush with the Chuck Face in the Open Position) 60HP - 3 Speed Gearbox with 4,660lbs Torque In Low Gear Max. Part Weight @ 20,000lbs

  • Mazak Integrex E-1550V / 10 II - 2008
    • Precio fijo

    Mazak Integrex

    Estados Unidos


    Max. Turning Diameter 78.74" | Max. Turning Length 54.92" | Spindle Motor 50 HP | Main Spindle 10,000 RPM | Max. Swing 80" | Tool Magazine Capacity 120 ATC | X-Axis Travel 73.82" | Y-Axis Travel 61.02" | Z-Axis Travel 52.95" | B-Axis Travel 150 Degrees | C-Axis Travel 360 Degrees Equipped With: Mazatrol Matrix CNC Control w/ 15" Color LCD Screen | Manual Pulse Generator | Operator Door Interlock with Lock Switch | Hydraulic Pressure Interlock | Mazacc 3D High Speed Software Package | High Smoothing Control Mazatrol Matrix CNC Control w/ 15" Color LCD Screen | Manual Pulse Generator | Operator Door Interlock with Lock Switch | Hydraulic Pressure Interlock | Mazacc 3D High Speed Software Package | High Smoothing Control

  • Mori Seiki SL-65C - 10.8 'Bar, 24 "Chuck, 12, 1997 Herramientas
    • Precio fijo

    Mori Seiki SL-65C - 10.8 'Bar, 24 "Chuck, 12, 1997 Herramientas

    Estados Unidos


    Chuck Size 24" | Max Diameter Bar Capacity 10.8" | Max Swing Over Bed / Carriage 42.6" | Max Turning Diameter 25.6" | Max Turning Length 27.3" | Main Motor 50/40 HP | Spindle Speed 660 RPM | Turret 12 | Spindle Nose A1-20 | X-Axis Travel 13.8" | Z-Axis Travel 30.3" | Approx. Weight 25,000 lbs. | Approx. Dimensions 12"4" x 8"4" x 8"5" | Fanuc 16T CNC Control | 24" Air Chuck | Chip Conveyor

  • Torno CNC ÍNDICE GFG250
    • Precio fijo

    INDEX GFG 250

    Año de hacer: 1987


    CNC lathe Manufacturer: Index Type: GFG250 Year: 1987 CONSULT TECHNICAL Data Control: Siemens Sinumeric System 8 turning length: 500 mm spindle bore: 65mm Diameter: 250 mm X axis travel: 310mm Z axis travel: 500 mm 16-compartment Revolver Accessories: chip conveyor , all tools (see pictures)!

  • AMUTIO Cazaneuve - HB 575
    • Precio fijo

    AMUTIO CAZANEUVE HB 575

    España | Barcelona


    AMUTIO CAZENEUVE universal lathe Model HB 575. Distance between centers 2000 mm Swing over bed 540 mm Centers height 270 mm. Ø over the slide 525 mm. Ø over transversal slide 300 mm. Ø spindle hole 51 mm. Bed width 400 mm. Max cross slide travel 305 mm. 18 Speeds ranges from 20 to 1600 rpm. Motor power 10 CV Equipped with: •Chuck with 3 clamps. •Open steady •Steady Ø 200 mm.

  • GURUTZPE - SUPER M
    • Precio fijo

    Gurutzpe SUPER M

    España | Barcelona


    GURUTZPE universal lathe Model SUPER M. Distance between centers 3000 mm. Ø over bed 720 mm. Ø over saddle 480 mm. Ø sobre bancada sin escote 960 mm. Recorrido carro transversal 280 mm. Tailstock Ø 72 mm. 18 Speeds from 12 to 1024 r.p.m. Main motor power 10 HP Machine dimensions 5200 x 1500 x 1500 mm. Weight 4500 kgs. Equipped with: •TdeG chuck of 3 clamps Ø 315 mm + 1 set of clamps •Turret quick clamping •4 tool-holder

  • CNC tornos SPINNER TC600-65 MC
    • Precio fijo

    CNC tornos SPINNER TC600-65 MC

    Turquía | İstanbul

    55.000 € $ 58.992 £ 47.380

    Details - Category: Start > all categories > 102. lathes > all lathes < back - No.: 30115589 - Updating date: 24.12.2016 - Quantity: 1 - Manufacturer: SPINNER - Model: TC600-65 MC - Type of machine: CNC Turning Machines - Description: CNC Turning Machines SPINNER TC600-65 MC used machine Swing diameter 600 mm Turning diameter 400 mm Turning Lenght 650 mm Spindle speed 4000 rpm Controller Fanuc 31i With Chip conveyor With 3 axial, 3 Radial live tools Can be inspected under power Price is FCA basis - CNC Turning Machines SPINNER TC600-65 MC used machine Swing diameter 600 mm Turning diameter 400 mm Turning Lenght 650 mm Spindle speed 4000 rpm Controller Fanuc 31i With Chip conveyor With 3 axial, 3 Radial live tools Can be inspected under power Price is FCA basis - New in: 2012 - Location: Turkey Istanbul - Machine in stock: Yes - Price: 55,000 EUR - 55,000 EUR - 55,000 EUR - send inquiry

  • Mazak Integrex e-670H - 18 "Chuck, 1600 RPM, 40 ATC, 2013
    • Precio fijo

    Mazak Integrex e-670H - 18 "Chuck, 1600 RPM, 40 ATC, 2013

    Estados Unidos


    Chuck Size 18" | Max Turning Diameter 42.13" | Max. Turning Length 120" | Max. Swing 42.13" | Spindle Bore 10.2" | Spindle Nose A2-11 | Spindle Speed 1600 RPM | Spindle Motor 60 HP | Spindle Taper 50 | Tool Changer 40 ATC Mazatrol SmoothX CNC Control C-Axis | High Speed Machining | Synchronized Mill Tapping | Programmable Servo Driven Steady Rests | Fully 5-Axis Contouring | Tailstock

  • Mag Boehringer VDF DUS-630TI - 15.75 "Chuck, 120" Centros de 2009
    • Precio fijo

    Mag Boehringer VDF DUS-630TI - 15.75 "Chuck, 120" Centros de 2009

    Estados Unidos


    Chuck Size 15.75" | Distance Between Centers 120" | Max. Swing Over Bed 24.8" | Stroke of Cross Slide 13.5" | Max. Swing Over Cross Slide 17" Equipped With: Siemens Sinumerik Control | Tailstock | Rota-S Plus 15 "" Chuck Tool Post | Steady Rest | Chip Conveyor | Siemens Sinumerik Control | Tailstock | Rota-S Plus 15 "" Chuck Tool Post | Steady Rest | Chip Conveyor

Información para "Tornos"

Inscribirse y dar aviso cuando nuevos productos estén disponibles. ¡No Spam!

¡Sí! Se ha suscrito correctamente.

¡Super! Por favor verifique la bandeja de entrada de su email y confirme el registro.

Formato de venta